What do you do when you have a green pool?

A green pool is an unpleasant problem, especially if you only find the problem after you’ve gotten your towel out, sunscreen on, and are ready to go for a dip in your pool. The presence of algae in your pool is frequently responsible for the appearance of green pool water. Algae blooms can emerge in your pool if the Free Chlorine level is too low. If you do not apply an algaecide to prevent pool algae growth, you risk acquiring pool algae if you are exposed to high temperatures, heavy rain, or poor circulation. If the correct procedures do not treat and prevent the problem adequately, stubborn pool algae can become challenging to maintain.

Listed below are the steps to get rid of the Green pool

Examine the water 

The first myth to dispel is that a low chlorine level is always the cause of a green pool. This is not always the case, though. Before taking any other action, we urge that you conduct a complete water test in every situation. An algae outbreak is ideal for establishing a relationship with your local pool shop, like us here at Pool Gear Australia. We are more than your average pool shop on the Gold Coast and will test your water using state-of-the-art devices that take less than a minute to complete. The results of your water test will assist you in determining what type of algae you have in your pool. Generally speaking, algae can be distinguished by their coloration, with each variety necessitating a distinct treatment technique.

Water in Proper Balance

Always start by checking the water in your pool. Your tests will inform you whether or not your water parameters are balanced. Pay close attention to the amount of free chlorine in your system. Your pool water becoming green can be caused by a lack of free chlorine. Always keep free chlorine between 1 and 4 parts per million. If necessary, use the proper chlorine and sanitizers to get the sanitizer levels back to adequate.

Swimming pools should be scrubbed on the sides and bottom

Before adding any chemicals to the water, get it scrubbed and cleaned with brushes you can buy from a good pool shop on the Gold Coast. Scrubbing will remove algae from pool surfaces. Scrubbing also allows chemicals to work faster since the algae are broken up.

  • Especially pay attention to areas where algae have built up. Then, clean the pool thoroughly by breaking up the algae.
  • Make sure you use a nylon brush if your pool is vinyl. Using wire brushes on vinyl pools is not recommended, but it might be okay on plaster pools.

Apply a Shock Treatment

Applying pool shock is the first step toward crystal clear water or you can take help from professionals also such as Pool Gear Australia. Shocking the water in your pool removes impurities that might promote algae growth and improve water filtration.

Apply an Algaecide

Algaecides are used to cure and prevent algae in swimming pools; however, not all algaecides are made equal. Choose an algaecide that kills green pool algal when treating green pool water. Some dead algae may remain in your pool after treatment. Brush your pool’s surfaces thoroughly regularly.

The restoration approach we prescribe often includes many treatments to restore your pool’s clarity and luster. It is feasible to DIY, but we have a fantastic team on the Pool gear Australia who is happy to assist you if you are unsure. Prevention is always preferable to treatment! To avoid the dreaded green pool outbreak, we are your trusted pool shop on the Gold Coast and we advocate regular professional pool maintenance service throughout the year.

Scroll to Top